Frequently Asked Questions

Machine features, applications and maintenance guidance

Machine features, applications and maintenance guidance

Custom working widths, drum sizes and blanket lengths

Machine features, applications and maintenance guidance

Sublimation Transfer Machine

We give the price quoted by the customer is

Technical Support

Source:ZS Machinery Time:2016-08-16 Click:892 Times

Running a rotary sublimation transfer machine comes down to a fixed sequence:

Switch on and set the drum temperature. Wait until it holds steady – this usually takes 30–45 minutes from cold.
Set the pressure for the fabric you are printing.
Thread the transfer paper and the fabric through together, print side against the fabric, and check the blanket tension.
Start the machine at a low speed and check the first few metres.
Once the colour is right, bring the speed up to production rate.
At the end of the run, let the drum cool before you release the blanket and clean the surface.

Never stop the machine with fabric pressed against a hot drum – it will leave a mark. If you have to pause, lift the pressure first.